Technical Calculation
Aluminium Profiles & Accessories » Aluminium Profiles
Note: For Moment of Inertia, please refer to Orientation of profile in Technical Details
Moment of Inertia: lxx cm4 lyy cm4
| PS2020-6 | 0.7 | 0.7 |
|---|---|---|
| PS2040-6 | 1.2 | 4.5 |
| PS3030CR-8 | 2.2 | 2.2 |
| PS3030-8 | 3.3 | 3.3 |
| PS3060-8 | 6.1 | 23.3 |
| PS4040CR-8 | 5.4 | 5.4 |
| PS4040L-8 | 8.2 | 8.2 |
| PS4040-8 | 9.9 | 9.9 |
| PS4080L-8 | 17.0 | 61.2 |
| PS4080-8 | 19.1 | 73.3 |
| PS8080-8 | 137.2 | 137.2 |
| PS4545CR-10 | 7.6 | 7.6 |
| PS4545L-10 | 10.4 | 10.4 |
| PS4545-10 | 14.3 | 14.3 |
| PS4590L-10 | 22.1 | 92.6 |
| PS4590-10 | 29.1 | 110.9 |
| PS4560-10 | 16.1 | 29.6 |
| PS6060-10 | 47.7 | 47.7 |
| PS9090-10 | 198.6 | 198.6 |
Example
Static Point Load 3000N centrally loaded on Ultraxis Profile assumming end supported
Load acted 800mm from one end
From the Chart, following A to E indicated 45x45 profile will suffice for this application
Extrapolating from the chart, deflection can be estimated easily